Good idea! Was looking at how the body sat on the shock tower last night and was looking around the garage for something to put thereMaybe they've put better springs on the new one. You'll be able to tell if the nose digs in on hard breaking and she rollls.
What tape u using ?
I found the back of the tray cracks where the wing mount is from hard tail langings I ended up DS taping a strip of 1.6mm alluminium across the back helped heaps. The rear shock tower punches through the body as well I put tabs of 3mm thick 3M tape above the tower points on all 4 to help it a bit. Don't scratch it ha ha !!!
The tape i use looks like this
Look at this on eBay http://www.ebay.com.au/itm/331969263658
Went through the manual... Outcast has thicker front shock oil than the kraton. Wil change it after a few runs.
Double checked the mesh late ladt night too... Got a little wiggle but if i twist the chassis even a small amount it tightensup to no wiggle at all!! So i'll put on the rr14t and adjust it tonight
Oh and it'll get scratched!! Alot!
Shelf body should be here by friday
... And i cant leave the bottom looking like this!! https://www.dropbox.com/sc/huamszel82x4xjd/AAABKN2E_c6iCIqk_eRJVMxRa
Haha...