The charger issued a connection error on channel A when I came back. So could have been a dirty balance plug, at least that's what I read on a different thread.
Well the charger decided to charge to almost 4.4 volts. The B channel had the correct 4.17volts just like I wanted.
I immediately discharged the lipo with the RC car. So the battery was 30-60minutes above 4.2 volts.
Is that lipo save to keep? No swelling yet. I recharged it properly and drove the car a little on 8s and everything looked normal.
Well the charger decided to charge to almost 4.4 volts. The B channel had the correct 4.17volts just like I wanted.
I immediately discharged the lipo with the RC car. So the battery was 30-60minutes above 4.2 volts.
Is that lipo save to keep? No swelling yet. I recharged it properly and drove the car a little on 8s and everything looked normal.