Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Don't think so, how are you going to put that much force on the gears?Them paddles be backward! Think 1 of em got away from ya as well. Little too much fun there
They actually are backward. They are supposed to scoop the sand for traction. Kinda weird that one blew apart, those are usually pretty tough. Did it diff out?Don't think so, how are you going to put that much force on the gears?
Gotta be one in every crowd
Really didn't know that!They actually are backward. They are supposed to scoop the sand for traction. Kinda weird that one blew apart, those are usually pretty tough. Did it diff out?
Just running it down the drive.Really didn't know that!
Don't think so, how are you going to put that much force on the gears?
Gotta be one in every crowd
Your new? I love you already..
Your right though, there is always THAT guy.
+1I always drill 4 4mm vent holes in center on off road tires.esspecilly if in snow,water..debris an moisture always gets in there an destroys foam plus additional venting helps ballooning an longevity of tires
Do this to them an they last much longer
He hasn't apologized yet either. How can you like that? You're a better man than I.
And it's *you're
Is there any conclusive proof venting does any good? With the exception of beadlocks, it's my guess that glued tires are better off being sealed. Because its the water and dirt that leads to prematurely ruining tires, imo. Water gets in there and degrades the foam, takes FOR-EV-VER to dry out, and if its not completely dried out it leaves the tire badly imbalanced.I always drill 4 4mm vent holes in center on off road tires.esspecilly if in snow,water..debris an moisture always gets in there an destroys foam plus additional venting helps ballooning an longevity of tires
Do this to them an they last much longer
They look backwards to me also bud..flip them ...Don't think so, how are you going to put that much force on the gears?
Gotta be one in every crowd
Gotta be one in every crowd??? My boy gave you solid advice..I suggest you take it or keep running your tires backwards..good luck with that ..the proper answer to his advice should have been "thank you" a little appreciation goes a long way hereDon't think so, how are you going to put that much force on the gears?
Gotta be one in every crowd
Don't worry about punctuations lol this is forum .like who caresMan I'm terrible with both spelling and punctuation. Its all good though.. I don't mind if you don't
My grammer i mean.
Is your drive paved?Really didn't know that!
Just running it down the drive.
I have the proline slingshot paddles and they are the only bashing tires I don’t have vented. The sidewalls are very thick and they barely balloon at all, I’ve been running them like that for years on 6s and they’ve held up great.Is there any conclusive proof venting does any good? With the exception of beadlocks, it's my guess that glued tires are better off being sealed. Because its the water and dirt that leads to prematurely ruining tires, imo. Water gets in there and degrades the foam, takes FOR-EV-VER to dry out, and if its not completely dried out it leaves the tire badly imbalanced.
I exploded them all with the sentons I had,after venting they lasted much longer...your 100% correct on how they get damaged...no matter how sealed ya think ya got them debris gets in them,or moisture then foams gets damaged an outa balance or worst everytime..venting slings all the debris an water out of themIs there any conclusive proof venting does any good? With the exception of beadlocks, it's my guess that glued tires are better off being sealed. Because its the water and dirt that leads to prematurely ruining tires, imo. Water gets in there and degrades the foam, takes FOR-EV-VER to dry out, and if its not completely dried out it leaves the tire badly imbalanced.
I hear you. I buy only belted tires and mostly because 80% of the I'm on paved roads. See no need at all for tires that balloon other than aerobatics, which I don't do really. However I did put 36 holes in each GRP of a set I have only to plug them back up .I exploded them all with the sentons I had,after venting they lasted much longer...your 100% correct on how they get damaged...no matter how sealed ya think ya got them debris gets in them,or moisture then foams gets damaged an outa balance or worst everytime..venting slings all the debris an water out of them
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!