Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
yup! i did...Hey man, I recently went the route of putting on the AE hex extenders and the MX28's on F11's. They are pretty awesome and the set up is much more bashy than buggy wheels. It doesn't seem to flip over onto its wheels (after a crash) as much with the extra weight of the MX28's, but the trade off is worth it.
I was having trouble with the pillow ball cracking the lower A arms (mostly on the driver's side). Now with the bigger wheels on it seems to be happening more. I have put a nylon washer between the pillow ball and A arm, didn't help and now going to try a metal washer.
I also am thinking of boiling the next replacement A arm to see if it makes it more flexible. I also ordered a set of the Meugen lower arms (as suggested by the RC guru Rich Duperbash) to see if they are any stronger than stock.
Have you had any issues with the A arms breaking?
Thanks mate will doI'd help you out if you were in Europe as I've modified the hubs on my Typhon so I don't need them anymore (you just need to take 2-3mm off the top of the hubs)
In any case: someone on ebay usually has them.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!