RC Steve
Very Active Member
- Messages
- 634
- Reaction score
- 1,377
- Arrma RC's
- Kraton EXB
- Notorious
- Outcast EXB
My daughter's Tekno MT410 steering sucks.
Sitting still the steering is full range and fast.
Backwards the steering is full range and fast.
Forward the steering is limited to about 10 degrees and the servo struggles.
Wiggle the steering wheel back and forth with the truck still and the steering frees up.
With the wheels off sitting on the ground nothing changes.
Replaced the servo, no change.
Rebuilt the bellcrank, no change.
Installed a Castle BEC, no change.
Replaced the C and steering blocks, no change.
Replaced the driveshaft, CVs, and axles, no change.
The front drive cups are heavily worn, could the dog bones be binding in the cups?
New drive cups have been ordered.
I'm running out of ideas.
Sitting still the steering is full range and fast.
Backwards the steering is full range and fast.
Forward the steering is limited to about 10 degrees and the servo struggles.
Wiggle the steering wheel back and forth with the truck still and the steering frees up.
With the wheels off sitting on the ground nothing changes.
Replaced the servo, no change.
Rebuilt the bellcrank, no change.
Installed a Castle BEC, no change.
Replaced the C and steering blocks, no change.
Replaced the driveshaft, CVs, and axles, no change.
The front drive cups are heavily worn, could the dog bones be binding in the cups?
New drive cups have been ordered.
I'm running out of ideas.