Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
It failed already I got a new servo but now the horn died. the servo I got is an axial PowerHD LW-30MG. Would It fit on that?You need to get the correct/matching horn.
It is best to get a replacement servo. The stock one will fail.. sooner than soon.
My servo got 25 spline is this possible my english isnt that good in german its called „Servo-Verzahnung“ but idk if this is the spline. Anyways I found this servo saver attached down below would you think it fits in the senton?Is this a Senton 3S? If so, that RC uses a servo saver and it would be wise to purchase a new servo saver or you will likely have issues.
The servo saver spline (T) will be dependent on the servo you have, just check the specs for the servo it will tell you what spline you have.
For 3S models, here is the 23T Saver: https://www.amainhobbies.com/arrma-mega-3s-blx-direct-mount-servo-saver-23t-ara340181/p1250091
And the 25T: https://www.arrma-rc.com/en/product/servo-saver-set-25t/ARAC8883.html
I don’t try to buy the same stock saver again, because it breaks easily, if it’s possible I’d like to buy an aluminum upgrade or something. And another question, whats the difference between 23T and 25T?Is this a Senton 3S? If so, that RC uses a servo saver and it would be wise to purchase a new servo saver or you will likely have issues.
The servo saver spline (T) will be dependent on the servo you have, just check the specs for the servo it will tell you what spline you have.
For 3S models, here is the 23T Saver: https://www.amainhobbies.com/arrma-mega-3s-blx-direct-mount-servo-saver-23t-ara340181/p1250091
And the 25T: https://www.arrma-rc.com/en/product/servo-saver-set-25t/ARAC8883.html
23T and 25T are the count of "teeth" that are on the servo. So a 23T would not fit on a 25t servo.I don’t try to buy the same stock saver again, because it breaks easily, if it’s possible I’d like to buy an aluminum upgrade or something. And another question, whats the difference between 23T and 25T?
My stock one broke after second or third ride, the holes for the screws broke I tried to glue it but it wasn’t a good option. So basically I can remove the screw sideways without screw it out properlyMaybe you bash harder than us but we have hardly broke any of the stock servo savers. They have worked out well for us.
You could try an aftermarket one but check the reviews, many are not so good.
What happened to your stock one?
I usually don’t bash very hard because I don’t have so much money to buy spare parts I’m really taking care of my truck. I think the saver broke as a small rock went into the servo operation area but I can’t say what really happened. Anyways I ordered a new one and I’m going to tell you how it does its job.Maybe you bash harder than us but we have hardly broke any of the stock servo savers. They have worked out well for us.
You could try an aftermarket one but check the reviews, many are not so good.
What happened to your stock one?
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!