Thank you
This is what I’ve done to build up and prevent some problems.
Removed both diffs, filled, and shimmed.
Aluminum yokes.
Replaced bell crank and shimmed. Only slop is in the balls.
Shimmed slipper clutch. Wasn’t expecting this but it is a lot quieter.
I got a 3D printed motor end support. Fits nice and bolts down.
Slipper shaft sleeve.
652 servo from Jenny’s.
Spare parts from Jenny’s
Lock tight
I think these things I learned on here saved me some troubles down the road. Only thing that bothers me still is the rod ends. Sloppy even with different balls.
Thank you for all the info!
Plus if something does go wrong I’ve had the whole thing apart and can easily fix it wherever I am.
This is what I’ve done to build up and prevent some problems.
Removed both diffs, filled, and shimmed.
Aluminum yokes.
Replaced bell crank and shimmed. Only slop is in the balls.
Shimmed slipper clutch. Wasn’t expecting this but it is a lot quieter.
I got a 3D printed motor end support. Fits nice and bolts down.
Slipper shaft sleeve.
652 servo from Jenny’s.
Spare parts from Jenny’s
Lock tight
I think these things I learned on here saved me some troubles down the road. Only thing that bothers me still is the rod ends. Sloppy even with different balls.
Thank you for all the info!
Plus if something does go wrong I’ve had the whole thing apart and can easily fix it wherever I am.