Quick Release body pins

[Robot Dad]

I searched to no avail. Has anyone tried the Amazon quick release pins for keeping their body on?

I used the proline screw on one's and they would always come loose when I would bash. Obviously the tried and true body pins are the most reliable but they are a pain to get off with my fat fingers

Pack of 4 Universal Aluminum Vehicle Hood Pins - License Plate Lock Clip, Quick Release Lock Latch Bumper Diameter 1.25 inch https://a.co/d/iyqRKDg

 

[332_RC]

I use Tekno TKR1235 clips. They are angled up, easy to get out. I can't get the flat ones out easily either.

 

[Dan B.]

I searched to no avail. Has anyone tried the Amazon quick release pins for keeping their body on?

I used the proline screw on one's and they would always come loose when I would bash. Obviously the tried and true body pins are the most reliable but they are a pain to get off with my fat fingers

Pack of 4 Universal Aluminum Vehicle Hood Pins - License Plate Lock Clip, Quick Release Lock Latch Bumper Diameter 1.25 inch https://a.co/d/iyqRKDgView attachment 352045

I think @LibertyMKiii uses these if memory serves…

 

[Tex Koder]

I think @LibertyMKiii uses these if memory serves…

Yes.
He does.

 

[morrjr71]

Angled body pins make it a lot easier to install and remove. I have both 30-degree and 90-degree angled body pins: the 90-degree pins are the easiest to use.

https://www.amazon.com/20-Pack-Universal-90-Degree-Angle-Hobbypark/dp/B01MQFB00V/ref=sxin_14_pa_sp_search_thematic_sspa?content-id=amzn1.sym.9db83c00-7b68-42dd-9741-7c5f896f9413:amzn1.sym.9db83c00-7b68-42dd-9741-7c5f896f9413&crid=2NR3FY8S3D9M0&cv_ct_cx=90+degree+body+pins+1/8&dib=eyJ2IjoiMSJ9.KIVWVuKmz1qYno1gj94XBXvPoXaOAA9iF-bEoNRSzyX2PWnc5h61MOFD8p3gLvxf6ALbnGrSLJ80mePZB8S6aw.MsbQYyDSwpQjG0eApM72arLijH3ehrdmdLLgFMCt-ag&dib_tag=se&keywords=90+degree+body+pins+1/8&pd_rd_i=B01MQFB00V&pd_rd_r=96f107f7-6d2a-44cc-81b8-bf1ecf24459a&pd_rd_w=gtu13&pd_rd_wg=0t1vY&pf_rd_p=9db83c00-7b68-42dd-9741-7c5f896f9413&pf_rd_r=J18E9R3Q1SHR9H9G2CNG&qid=1709391737&sbo=RZvfv//HxDF+O5021pAnSA==&sprefix=90+degree+body+pins+1/8,aps,94&sr=1-2-364cf978-ce2a-480a-9bb0-bdb96faa0f61-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9zZWFyY2hfdGhlbWF0aWM&psc=1

 

[LibertyMKiii]

I searched to no avail. Has anyone tried the Amazon quick release pins for keeping their body on?

I used the proline screw on one's and they would always come loose when I would bash. Obviously the tried and true body pins are the most reliable but they are a pain to get off with my fat fingers

Pack of 4 Universal Aluminum Vehicle Hood Pins - License Plate Lock Clip, Quick Release Lock Latch Bumper Diameter 1.25 inch https://a.co/d/iyqRKDgView attachment 352045

Yep I have used these. The work with the Arrma 6s body mounts. The challenge is making a giant hole in your RC body.
The Only bodies I tried this with were Speed run bodies and sometimes the body angles don't work well with it.

Other than that I was pleased with these. They can also be painted to match the body.

Example of them painted Ferrari red.

 

[DeeZeeRc]

I searched to no avail. Has anyone tried the Amazon quick release pins for keeping their body on?

I used the proline screw on one's and they would always come loose when I would bash. Obviously the tried and true body pins are the most reliable but they are a pain to get off with my fat fingers

Pack of 4 Universal Aluminum Vehicle Hood Pins - License Plate Lock Clip, Quick Release Lock Latch Bumper Diameter 1.25 inch https://a.co/d/iyqRKDgView attachment 352045

Yes they work good on my Felony

 

[Dan B.]

I searched to no avail. Has anyone tried the Amazon quick release pins for keeping their body on?

I used the proline screw on one's and they would always come loose when I would bash. Obviously the tried and true body pins are the most reliable but they are a pain to get off with my fat fingers

Pack of 4 Universal Aluminum Vehicle Hood Pins - License Plate Lock Clip, Quick Release Lock Latch Bumper Diameter 1.25 inch https://a.co/d/iyqRKDgView attachment 352045

They work well, but the ones you linked are huge. Get the 22mm ones instead, they’re far better suited to the task.
https://www.amazon.com/gp/product/B0BYP3BKL3/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1

 

[Luke66]

Wow that's cool. I may throw some of these on my Detta or Slashes. They seem easiest to use.

 

[DeeZeeRc]

Thx!!! I'm definitely gonna order a couple set of these. The ones I got on my Felony is kinda big...but they do save alot of time. And they work good cart wheel.
Triple Flips on Pavement .