My kraton exb v2

[Kiba.k9]

Stock electronics has m2c wheel hexes 3drc wing and bumperspring campsite rc fans and stacks and mud guards 14t pinion and I think it's stock treal hinge pin blocks and hv servo 45kg outcast side guards and have some kudra parts in the way

 

[GraniteFox]

Nice. I have found this to work well as fan screens. Just cut to size and screw in at the top. https://www.amazon.com/dp/B0BWS1CZCS?psc=1&ref=ppx_yo2ov_dt_b_product_details

 

[Kiba.k9]

Treal diff cup installed I'll put it in Saturday the original one got a pretty bad score in it from a rock

 

[GraniteFox]

Yup. Center diff takes a beating and handles a lot of heat. Not a good combo for plastics. Aluminum is a solid upgrade for the center diff. Nice!

 

[Kiba.k9]

Nice. I have found this to work well as fan screens. Just cut to size and screw in at the top. https://www.amazon.com/dp/B0BWS1CZCS?psc=1&ref=ppx_yo2ov_dt_b_product_details

I use aluminum window screen

 

[Kiba.k9]

Now it also has treal hubs front and rear along with the treal servo mount and abcd blocks 3drc wing and bumper spring along with scorched diff input cups hot racing servo horn and linkage

 

[Kiba.k9]

I recommend the servo horn and servo mount took a lot of play out of my steering made it alot more responsive

 

[Kiba.k9]

I also just got a ram jam shipment on the way along with a 15 t pinion I'm going to swap the 15t in and run it till something goes sideways when I went from 13 to 14 I raised the punch 2 I'll raise it 1 more on the 15t pinion

 

[Kiba.k9]

Well the jx servo died it's out and now the perfect pass will be installed when it gets here

 

[Kiba.k9]

I swaped out the jx hv servo and put in a perfect pass 56kg servo

And put in ramjam input cups