calebgilmore
Very Active Member
- Messages
- 1,562
- Reaction score
- 2,094
- Arrma RC's
- Granite
- Infraction
- Kraton 8S
- Kraton 6s
- Mojave
- Notorious
- Outcast 6s
- Senton 6s
- Talion
- Typhon 6s
- Vorteks
- Voltage
Knocked a mojave out for a friend looking to get into one on a budget. Dipped into my spares to help get it done. I need a real job building trucks second build for someone. He sold me a 6s senton with the castle esc/2200kv motor in it and he wanted me to put it in the mo to get it going but will upgrade later. I would have definitely put a beefier combo in but it’s a start!
Also had to email horizon about the exb upper hinge pin block I had bought that was missing the drilled/tapped holes for the keeper screws
This truck has exb shock towers/front upper rear hinge pin block, just bash it +2mm hex and wheel nuts, exb shock stand offs, a set of methodrc wheels and worn vitavons on hyrax. I had a stock k6 ebs servo I was going to use on a small tire build I threw in. Tekjo gaskets on the cups and bulkhead to chassis as well.
Also had to email horizon about the exb upper hinge pin block I had bought that was missing the drilled/tapped holes for the keeper screws
This truck has exb shock towers/front upper rear hinge pin block, just bash it +2mm hex and wheel nuts, exb shock stand offs, a set of methodrc wheels and worn vitavons on hyrax. I had a stock k6 ebs servo I was going to use on a small tire build I threw in. Tekjo gaskets on the cups and bulkhead to chassis as well.