snotbottom
Active Member
Blew out the bearing on the front right on the Kraton. It was probably time for a tear down and rebuild anyway, although I was hoping to make it all the way to Winter before starting on that.
While trying to tear it down, I had two of the set screws that wouldn't let go. One I was able to break loose with a little heat, but the other I stripped out the hex and had to use an easy out.
I already had bearings on hand, but I should get another kit from Jim and see what else he might have for me to buy .
While trying to tear it down, I had two of the set screws that wouldn't let go. One I was able to break loose with a little heat, but the other I stripped out the hex and had to use an easy out.
I already had bearings on hand, but I should get another kit from Jim and see what else he might have for me to buy .