Typhon Typhon center CVD?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Thangstudio

Fairly New Member
Messages
21
Reaction score
115
Arrma RC's
  1. BigRock
  2. Nero
I searched the CVD center for Typhon. But Arrma does not seem to produce. As I know Durango is part of Arrma. Can I use DEXT8 Buggy's CVD center for Typhon?
Anyone who has tried and succeeded, please give me advice.
Thanks
This is comparision image

Durango 92mm
1.jpg

2.jpg

a7c9ccd99c0464dbfe2623650f3de0423f4012be80b3f8ad58c32c3bd50dc31a.jpg
6606bf5018f695566c473168aa60cf6ed751a1fbe335aa8cb29ae7626572cb0b.jpg
 
I was wondering this myself, I have seen pictures around here with people running center cvds but I have no idea what ones they are running.
 
The TD center diff/motor mount is different, so the driveshafts are not the same length as the Arrma's. I suspect you could try to swap the center diff (drilling new holes required) then the TD driveshafts might work.
 
Jerry-rigged is right, the DEX8 has a different measurement on the centre diff. I have a DNX8 and the cvds are a straight swap. i haven't tried running on them yet, but i fitted them to my typhon and they fit just fine.

I don't have the part number but on the cvds its states 83mm and 110mm they should work.

hope this helps.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top