Talion Stronger front CV axle.

[s14tat]

Just landed on one front wheel from a pretty big jump and popped the pivot ball out. No big deal until I realized the axle is bent like a banana. New factory ones are on the way, but are there any better ones? I don't think MIP makes anything do they?

 

[Jerry-rigged]

Might try and see if you can find some CVD's from the DEX8T. They should be a direct fit. Might be stronger.

edit - check this post - the DEX8T axles should fit, plus part number -
https://arrmaforum.com/threads/talion-tips-and-tricks.51/#post-12121

Edit #2 -
After checking, don't think the Mugen shafts would work, unless you swap everything outside of the pillow balls. Mugen uses u-joints instead of CVD's, so bearing size is off, so the hub is off, so the axle length is probably off...

 

[s14tat]

thanks jerry, but it looks like those might be the shafts going from the center diff to the front and rear diffs.

 

[Jerry-rigged]

No, the center driveshafts from the TD cars don't fit Arrma - the center diff and motor mount is different.

Here is the TD210045 listed on that chart -
https://www.amazon.com/Team-Durango-TD210045-Driveshaft-Vehicle/dp/B00WZDD0ZM

 

[s14tat]

awesome!! thanks.