if you have losi 46T or 48T 8ight spurs handy...i need a favor.

[builthatch]

can you measure the center bore for me? they all look slightly too big to me to work with the Arrma center diff outdrive, o-ring, etc.

i can't seem to find definitive info on what spur will work with the rest of the Arrma center diff, OR, what diffs are a drop in. i see people mention dnx408 i believe, but i haven't seen anyone running it. doesn't mean it's not there, just means i can't find it.

1. what spurs bolt onto otherwise all-Arrma center diff and work whilst running, not just fit.
2. what alternative center diff assemblies drop into the Arrma center diff mounts and work while running.

that's the info i'm trying to compile. thanks!

 

[slick2500]

I saw this thread where someone links to a center diff from a mugen that is supposed to be a direct drop in. I haven't checked to see if they offer different sized spurs, it's from a racing truggy or buggy so I would assume they offer different sizes for the spur. https://arrmaforum.com/threads/diff-build-with-mugen-parts.4644/

 

[rag6]

Ive been ressearching this and seen a thread that says the hpi apache spur fits

https://www.ebay.com/p/Integy-C25284-Aluminum-46t-Spur-Gear-HPI-Apache-SC-C1-Flux/1741991042

Not saying it will work, someone else said it would and i bookmarked it.

 

[slick2500]

Ive been ressearching this and seen a thread that says the hpi apache spur fits

https://www.ebay.com/p/Integy-C25284-Aluminum-46t-Spur-Gear-HPI-Apache-SC-C1-Flux/1741991042

Not saying it will work, someone else said it would and i bookmarked it.

Inner hole to big

Bought this gear for my Typhon, bolt pattern is good but the inner diameter hole in which the drive cups enters is to big. There's to much slop when put together.

Would probably have to find a way to make a shaft spacer or a sleeve or something.