Outcast Arrma Outcast Heatsink & Dual Fans

[Raji]

Hi everyone, I like this compo so I decided to share it.
this combo will make the motor really cold.

I run My outcast on 6S+ 5400Mah 50C. It was around 60F today I know it's cold but at the end the motor was cold. check it out.

In the beginning I was surprised by fans size, but they can blow the whole car. you can feel the air near the receiver box and the Servo.

installation:
I combined the tow fans wire to one wire. Then, I wired it with the ESC fan. You need to have Y-Harness-Extension

tell me your opinion when you instill it.

Yeah Racing Black 1/8 Aluminum Motor Heat Sink W/ Dual Cooling Fans YA-0261BK
https://www.ebay.com/itm/Yeah-Racin...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649


Enjoy >>>

 

[WoodiE]

Nice and clean install @Raji, I like it!

 

[Raji]

Nice and clean install @Raji, I like it!

Thank you @WoodiE

 

[slick2500]

That looks like it fits much better than the Hobbywing does.

 

[Vedak]

Thanks for the post. I'll have to do this in the future, with the weather on the cool side right now, I haven't had any heating issues.

 

[Raji]

That looks like it fits much better than the Hobbywing does.
View attachment 13527

It is fit right away

Thanks for the post. I'll have to do this in the future, with the weather on the cool side right now, I haven't had any heating issues.

It is very nice even when its cold. I stopped checking the temp it is always little bit warm

 

[Vedak]

What kind of connectors for the y-harness? jr/hitech, futaba?

 

[Raji]

What kind of connectors for the y-harness? jr/hitech, futaba?

check this link
https://www.ebay.com/itm/5Pcs-6in-R...157633?hash=item2ca0bacc81:g:VggAAOSwt5hYfAip

The fans come with different connectors. but it can fit in the Futaba connectors easily.

 

[Vedak]

Thanks, I'll order some up

 

[Raji]

Thanks, I'll order some up

Not a problem, good luck.

 

[Vedak]

Installed mines today. Works excellent.

 

[Mad Man Slice]

I actually just did this mod as well. Works amazing!!

 

[Raji]

View attachment 14330 I actually just did this mod as well. Works amazing!!

Nice, Glad you like it

 

[Trapper]

looks great!!

 

[Raji]

looks great!!

Thanks

 

[Headbangerfacerip]

I got the castle one for my 1515 motor. Keeps it very cool.

I have a question for anyone. When I replaced my bearings in my castle motor it had a bunch of sand in it. My question is do you think I should close up the extra mounting holes with some high temp rtv or similar to seal up the motor or does the motor need venting holes? I tried taking a picture of the sand but it's hard to see.

 

[Boge82]

Thanks for the post, had to get it

 

[Raji]

Thanks for the post, had to get it

Looks great

 

[SamT]

Hey guys i have just installed the YR tornado twin fans and they work a treat. Straight up install even for a noob like me.

 

[Raji]

Hey guys i have just installed the YR tornado twin fans and they work a treat. Straight up install even for a noob like me.

Great you like it