Talion Talion wheel wobble

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

RcDaddy

Member
Messages
26
Reaction score
17
Location
Syracuse ny
Arrma RC's
  1. Granite
I have had my talion just over a week and straight out the box two wheels wobble pretty good. Took it to my lhs they said its normal so i called arrma and they said a little wobble is normal so i don't know. Im not new to the hobby but i am new to 1/8th scale. Ive never had this much wobble so has anyone else experienced this and is it normal?
 
I had two of four with your problem an same answer from arrma. I decided to not run them two so far. Pre mounts can be a gamble ,also was a big problem with V1 Xmaxx,but they sent a whole set to me with a simple picture sent to them.arrma just says awe run them there ok?
 
I just got my Talion today, and 3 out of 4 wheels are significantly warped and out of round. The RR is especially bad. It has about 1/4-3/8" of lateral runout.
 
A thing I discovered on mine were that they were glued wrong. I had 2 wheels with this problem, I pushed the sidea inwards with my thumbs until the glue broke off a bit. That helped reduce the wobble but after running them the tires unglued. I took the chance and taped them on the inside, reglued and use them as fronts, haven't had a problem since.
Maybe some of you can fix them also by reglueing them.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top