Kraton Shock rod ends

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Decided to check into shock shafts... as far as I know all the non-nero 1/8 scale shafts are
According to Arrma's website the front shaft for the Outcast, Kraton, Talion are 64mm and the rears are 75mm

I was searching around and found these which are 63mm https://www.amainhobbies.com/kyosho-3.5mm-rear-shock-shaft-2-kyoifw149-02/p3980
And these, which are 66mm https://www.amainhobbies.com/kyosho-rear-shock-shaft-3.5x66mm-2-mp777-sp2-kyoif337/p4068
I would think that either could potentially work on our fronts. They even come with a nice size washer instead of arrmas tiny stock one.

I haven't found an alternative brand rear yet.
 
Last edited:
Thanks mate. Still works out at $20+ with shipping for me.

For those that are interested, Dollar Hobbyz have the Tekno ET48.3 shocks available as a full kit (shocks, bodies, caps, shafts, seals, springs, stand-offs, etc.), for $35:

Front: https://www.dollarhobbyz.com/products/tekno-1-8-et48-3-front-shocks-springs
Rear: https://www.dollarhobbyz.com/products/tekno-1-8-et48-3-rear-shocks-springs

And a $5 off coupon is currently live: "BIG"

* These aren't the 'option' shocks with the TiN-coated shafts and delrin guides, however, they are a complete kit and still have 4mm shafts. And parts support.
 
Last edited:
That is similar to the kit I bought but my spring cups don't have the hole to secure to the shock end.
I have bought a few things from dollar hobbyz and they have been good.
 
Hey guys,

I just created a new thread that's kind of a follow up about how amazed I've been with these Tekno shocks. Fwiw, I got by Et48.3 built and the omg is this thing incredible. Thanks to those of you here that validated the Tekno quality when I first started raving about the shocks. You are definitely right. And now I own 7 freaking trucks. So thanks a lot. Lol
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top