I crammed a the 130a/1900kv into my vorteks. what pinion tooth count would i want for punchy bashing? Im a little confused because i know the motor will have more torque and a lower top speed then the stock motor but i can add different size gears to play around.
Need Help With Gear Purchase For Vorteks
- Thread starter AgingEpic
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
- Thread starter
- #3
3 and 4
razorrc
Very Active Member
- Messages
- 3,288
- Reaction score
- 6,838
- Arrma RC's
- BigRock
- Gorgon
- Granite
- Kraton EXB
- Kraton 4s
- Mojave 4s
- Outcast 4s
- Outcast 8s
- Outcast EXB
- Senton 3s
3200kV x 14.6V = 46720 revs
1900kV x 14.6V = 27740 revs
27740 / 46720 = 59%
So your motor will be about 40% slower top speed on stock pinion and 3S (14.6V). I’ll leave the rest of the calculations up to the reader.
1900kV x 14.6V = 27740 revs
27740 / 46720 = 59%
So your motor will be about 40% slower top speed on stock pinion and 3S (14.6V). I’ll leave the rest of the calculations up to the reader.
